Samsung GALAXY CORE Prime User Manual page 66

•
Advanced:
-
Network notification: Receive a notification
when new Wireless Access Points (WAPs)
are available.
-
Keep Wi-Fi on during sleep: Specify when
to disconnect from Wi-Fi.
-
Always allow scanning: Allow Google
location service and other apps to scan for
networks, even when Wi-Fi is turned off.
-
Install certificates: Install authentication
certificates.
-
MAC address: View your device's
MAC address, which is required when
connecting to some secured networks (not
configurable).
-
IP address: View your device's IP address
(not configurable).
•
WPS push button: Set up a connection to a
WPS (Wi-Fi Protected Setup) router or other
equipment.
•
WPS PIN entry: View the PIN used by your
device to set up a PIN-secured connection
to a Wi-Fi router or other equipment (not
configurable).
Wi-Fi Status Indicators
Status bar icons show your current Wi-Fi connection
status:
•
When Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP), displays.
•
If a Wi-Fi access point is available, but your device
is not connected to it,
display if there is a communication issue with the
target Wireless Access Point (WAP).
Settings
displays. It may also
Wi-Fi Direct
Wi-Fi Direct allows direct device-to-device
connections via Wi-Fi, without having to connect to a
Wi-Fi network.
1. From a Home screen, tap
Settings.
2. Tap Wi-Fi, and then tap ON/OFF to turn Wi-Fi on.
Wi-Fi must be on to configure settings.
More options > Wi-Fi Direct. Your device
3. Tap
automatically scans for nearby Wi-Fi Direct
devices.
4. Select a device and follow the prompts to
complete the connection.
To disconnect from a device:
► Tap END CONNECTION.
Wi-Fi Direct Status Indicator
When your device is connected to another device
using Wi-Fi Direct,
61
Apps >
displays in the Status bar.
Wi-Fi