TP-Link kasa smart KA200E Manual

Let's get started with your Kasa Cam Outdoor Extension Cable.

Before You Start

Get Your Tools Ready

You'll need a Philips screw driver to
secure the wall mount. Other tools
will vary based on wall materials.
Notes:
1. If you don't need wall anchors, use a 3/32-inch drill bit .
2. If you're using the provided anchors, use a 7/32-inch drill bit.
3. If you need to route the USB cable through a wall, use a 7/8-inch
drill bit, and caulk or sealant is necessary for an exterior wall.
STEP 1
Connect the Cord
Press down on the latch to
remove the plug adapter and slide
the extension cord into position.
STEP 2
Put Into the Case
Open the weatherproof case and
place the power adapter inside.
Close the case and ensure it's
latched to keep water out.
Kasa Cam Outdoor Extension Cable www.kasasmart.com