Table of Contents
Advertisement
Using your freezer
The Power Saving Control...
operates
electric
heaters
These heaters help pre-
vent moisture
from forming
on the outside
of the
freezer when humidity
IS high
1 Use the OFF setting when humidity
is low
2 Use the ON sethng only if moisture
forms on the
outslde of the freezer
Changing the light bulb...
Setting the temperature control...
To start, turn control to the middle
of the dial. This
setting is designed
to maintain
the temperature
at
or near
0°F (- 17.8 "C] under
normal
operating
conditions.
Adjusting the temperature control..
I. Turn control to higher number
for colder temper-
atures
2. Turn to lower number
for less cold temperatures.
Cooling freezer first...
I, Allow freezer to cool 6 to 8 hours before filling with
frozen
food.
2. Let it cool overnight
before adding
large amouni
of unfrozen
food.
Note: When freezer IS first started, the compressor
will run constantly
until the cabinet
is cooled.
It may
take up to 6 to 8 hours or longer, depending
on roon-
temperature
and the number
of times the freeze1
door is opened
After the cabinet
is cooled,
the compressor
wil
turn ON and OFF as needed
to keep the freezer a
the proper
temperature
WARNING:
To avold
possible
shocks,
first unplug
freezer
or turn off electricity
leadlng
to freezer
at the main power
supply.
I, Remove the light shield from the side of the control
panel
Depress the back of the shield to release the
tabs, then pull away
2. Replace
bulb with a 40-w&
appliance
bulb.
3. Replace
the light shield. Insert the shield tabs in the
slots, then press the shield to snap into place.
-
light
Shield
Hide quick links:
Advertisement
Table of Contents
