Transport And Storage; Troubleshooting - Hilti TE 3000-AVR Original Operating Instructions

Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals
and make sure that they all function correctly.
• Do not operate the product if signs of damage are found or if parts
malfunction. Have it repaired immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and
check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Store or online at: www.hilti.group.
6

Transport and storage

• Do not transport electric tools with accessory tools fitted.
• Always unplug the supply cord before storing an electric tool or appliance.
• Store tools and appliances in a dry place where they cannot be accessed
by children or unauthorized persons.
• Check electric tools or appliances for damage after long periods of
transport or storage.
7

Troubleshooting

If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
7.1 Troubleshooting
Trouble or fault
The breaker doesn't
start.
10 English
Printed: 05.02.2019 | Doc-Nr: PUB / 5364012 / 000 / 01
Possible cause
Electronics initialization
in progress (takes up to
4 seconds after plugging
in). The electronic restart
interlock is activated
after an interruption in
the electric supply.
Action to be taken
▶ Switch the power tool
off and then on again.
2190684
*2190684*