D-Link NPP-5E1BLK243 Hardware Quick Installation Manual page 2

About This Guide
This guide contains step-by-step instructions for
setting up your D-Link Unshielded Patch Panel.
Please note that the model you have purchased
may appear slightly different from those shown in
the illustrations.
Product Overview
Front Panel
lor Coding Information
r Coding Information
T568B
Figure 1. Unshielded Patch Panel Front
T568B
lue Pin 5 White/Blue
ue Pin 5 White/Blue
Color Coding Information
Pin 4 Blue
Pin 4 Blue
Green Pin 1 White/Orange
T568A
een Pin 1 White/Orange
Pin 1
Pin 2 Orange
Pin 2 Orange
Pin 2
Orange Pin 3 White/Green
ange Pin 3 White/Green
Pin 3
Pin 6 Green Pin 4
Pin 6 Green
Pin 5
Brown Pin 7 White/Brown
own Pin 7 White/Brown
Pin 6
Pin 8 Brown
Pin 7
Pin 8 Brown
Pin 8
Installation
Strip approximately 30mm of the cable jacket,
and separate the wires into 4 pairs.
2
T568B
White/Green Pin 1
Green Pin 2
White/Orange Pin 3
Blue Pin 4
White/Blue Pin 5
Orange Pin 6
White/Brown Pin 7
Brown Pin 8
Table 1. Wire Color Code
30mm
Figure 2. Cable Wiring
4
4
Follow the wiring sticker to place the wires into
IDC slot. Use the impact tool to punch and
connect the wires on the IDC.
5
5
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
Use the Cable tie to manage these cables, then
complete the installation.
Ver. 1.00(WW)
D-Link Unshielded Patch Panel Quick Installation Guide
Figure 3.
Figure 4.
Cable tie
IPTB series
Strip approximately 30mm of
the cable jacket, and separate
the wires into 4 pairs.
Follow the wiring sticker to place
2013/04/11 GAAHA1Y1100004
the wires into IDC slot.
Cable tie
Fo
Fol
th
the
Us
Use
co
con
U
Us
th
the
th
the