Using The Additional Emergency Release - Westfalia 19 36 07 Instruction Manual

Ask a second person to assist you while checking function-
ality. Do not leave the garage and do not close the garage
door with the garage door opener unless you have tested
proper function of the additional EMERGENCY release.
Hint: Make sure not to bend the wire. Also make sure the
garage door is not touching the garage door frame too tight.
Otherwise the pressure on the frame will be very high and
thus will lead to high power requirement for releasing the
garage door.

Using the additional EMERGENCY Release

1. Insert the key into the locking cylinder. Turn the key to the
right (clockwise) in order to release the locking cylinder.
2. Pull out the locking cylinder and the key from the socket
and pull on the wire in order to release the EMERGENCY
release. Do not pull on the key or grasp the locking cylinder.
The wire will pull down the EMERGENCY interior release
and thus will release the pulley. Now the garage door can
be opened by hand.
3. To operate the garage door opener again, first reinsert the
locking cylinder into the socket and lock with the key. Re-
move the key.
4. Finally check whether the chain connector (see manual of
garage door opener, article no. 13 40 31) has engaged into
the pulley before operating the garage door opener again!
We recommend checking every month all components of
the EMERGENCY release for proper fit and functionality.
Mounting and Using
12