Advertisement
Two additional wires will need to be passed through each door, along with the other power
window wires. This should be done using a flexible rubber tube or rubber grommet to protect the
wires, or by using the optional DAKOTA DIGITAL, INC. MAGNUM SHOOTERS. MAGNUM
SHOOTERS will eliminate the wires running through the door jambs entirely for the cleanest
appearance possible. When these highly conductive brass contacts are mounted to the door and
to the door jamb they eliminate the wires completely. If you would like to use MAGNUM
SHOOTERS they can be ordered directly from DAKOTA DIGITAL, INC. by calling toll free 1-800-
852-3228. Using either the flexible rubber tube, or MAGNUM SHOOTERS, route the remaining
wires under the dash for the best location and appearance.
WIRING DIAGRAMS
To solenoid or other device.
The blue wire can be used for one channel and the green wire for another channel.
To solenoid or door actuator.
To solenoid or door actuator.
Do not connect.
Wiring a relay to one of the channel outputs
GREEN
Fused 12V power.
Do not
BLUE
connect.
30
BLACK
Using a dual relay pack to operate solenoids or door actuators.
PURPLE
Fused 12V power.
BLUE
GREEN
BROWN
WHITE
RED
Fused 12V power.
87
86
WHITE
To CMD-2000 channel output.
85
To CMD-2000
BLUE
Channel output.
small wire
DUAL
RELAY
RED
FUSED 12V POWER
PACK
To CMD-2000
GREEN
small wire
Channel output.
3
Advertisement
