Advertisement
Wiring harness color code.
GREEN
driver's window up relay
RED
constant 12 volt battery source
BLUE
passenger's window up relay
BLACK
chassis ground
WHITE
driver's window down relay
YELLOW
passenger's window down relay
PINK or GRAY
CHANNEL 7 relay (optional)
PURPLE
CHANNEL 6 relay (optional)
BROWN
CHANNEL 5 relay (optional)
The remote system output wires are negative switched outputs designed to turn on external
relays. These outputs can only handle 0.25 amps and must be used with a relay. Two dual relay
packs are supplied in the kit. To use all 7 channels you will need to purchase three additional
relays.
WINDOW CONTROL OPERATION
Each key chain transmitter has four buttons. Each button will activate its own independent
channel when pressed. Also, an additional 3 channels can be activated by pressing button 1 and
one of the other three buttons at the same time.
• Button 1 activates the driver's window up. The window will continue to move as long as the
button is held. Button 3 activates the driver's window down.
• Button 2 activates the passenger's window up. Button 4 activates the passenger's window
down.
• Pressing buttons 1 and 2 at the same time can activate an external relay on Channel 5.
• Pressing buttons 1 and 3 at the same time can activate an external relay on Channel 6.
• Pressing buttons 1 and 4 at the same time can activate an external relay on Channel 7.
The emergency release switch can be wired to roll the driver's window down to provide
emergency entry to the vehicle.
LOCK/UNLOCK OPERATION
Each key chain transmitter has four buttons. Each button will activate its own independent
channel when pressed. Also, an additional 3 channels can be activated by pressing button 1 and
one of the other three buttons at the same time.
• Button 1 activates the door actuator to lock the doors. Button 3 activates the door actuator to
unlock the doors. The door actuator will remain powered for as long as the button is held. The
buttons should not be held more than a couple of seconds to avoid damaging the door lock
actuators.
• Pressing button 2 can activate an external relay on Channel 2. This can be used for a trunk
latch release or other function.
• Pressing button 4 can activate an external relay on Channel 4.
• Pressing buttons 1 and 2 at the same time can activate an external relay on Channel 5.
• Pressing buttons 1 and 3 at the same time can activate an external relay on Channel 6.
• Pressing buttons 1 and 4 at the same time can activate an external relay on Channel 7.
2
Advertisement
