What Happens In Each Option - Whirlpool GDP8500XX Use And Care Manual

Operating Instructions
Continued
What happens in each option
Water heating
The dishwasher will heat water during portions of
the Pots & Pans, Normal and Light Wash Cycles
to improve washability (see pages 6 and 7).
The Cycle Control Knob does not move while the
water is heating. The heating time is based on the
temperature of the water supply as it enters the
dishwasher. The cooler the water, the longer the
heating time. When the water temperature reaches
140°F (SO'C), the Cycle Control Knob will begin
moving again. If the water supply is already hot
enough, the dishwasher will not pause.
Lo-Energy Option
The dishwasher will not heat the wash water as
described above when the Lo-Energy Option is
selected. This will reduce the amount of electricity
needed to run the dishwasher, but loads may
not wash as well if the water supply temperature
is too low. The Lo-Energy Option cannot be
selected for the Pots & Pans Cycle.
Air Dry Option
Air in the dishwasher is automatically heated
during the "dry" part of all cycles except Rinse
& Hold.
If the Air Dry Option is selected, air in the dish-
washer is not heated. Using this option helps save
energy, but dishes take longer to dry (overnight)
and some spotting may result. Some items (such
as plastics) may need towel drying.
For best drying results, use a liquid rinse agent
such as Jet-Dry.@