Table of Contents
Advertisement
Selecting an option
Options can be selected
by touching
the SELECT OPTION pad. Each
touch of the pad advances
the display
to the next option. There are
three options available:
AIR DRY, HEAT DRY and HI TEMPAII optionscan
m
be changed
any time the display
is on, including
during a program.
When the RINSE program
is selected,
options are not available.
When
POTS & PANS or CHINA program
is selected,
only HEAT DRY and AIR
DRY options
are available.
AIR DRY
The AIR DRY option
helps
save
energy,
but the
dishes take longer to dry (overnight).
Some water
spotting
may result. Some items (such as plastics)
may need towel drying.
For best results, use a liq-
uid rinse aid such as Jet-Dry"
HEAT DRY
When HEAT DRY is selected,
the air in the dish-
washer
is heated
during
the "dry" portion
of any
program
- except
RINSE.
HI TEMP
When HI TEMP is selected,
the water
for the main
wash and final rinse is heated
to 145 F (63 C). POTS
& PANS has the HI TEMP option
pre-programmed
into it. HI TEMP can not be selected
with RINSE or
CHINA programs
A Dry Option
will show in the display
with HI TEMP
Be sure to select the desired
Dry Option (HEAT DRY
or AIR DRY) in combination
with HI TEMP
l
Touch SELECT OPTION pad until HI TEMP indicators
are shown in the display.
l
Option
indicators
will show in the display
if they
cannot
be selected
with a program;
RINSE, POTS
& PANS or CHINA.
l
You can change
an option while the program
IS
running
by touching
the SELECT OPTION pad.
Using PROGRAM MEMORY
The use of PROGRAM MEMORY lets you store the
complete
dishwashing
program
that you most fre-
quently
use.
To set PROGRAM
MEMORY for the first time:
1. Touch PROGRAM MEMORY pad once. The PRO-
GRAM Indicator
will show on the display.
2. Select the dishwashing
Program,
Options
and
Delay Hours. This is done by touching
the SELECT
PROGRAM, SELECT OPTION and DELAY pads.
3. Touch
PROGRAM
MEMORY
pad
a second
time. This enters the selected
Program, Options
and Delay Hours into the dishwasher's
memory.
NOTE: Each step
must be completed
within
15 seconds.
If not completed
in 15 seconds,
the display
will go blank.
To start
the
dishwasher
using
PROGRAM
MEMORY:
l
Touch
START. The dishwasher
will immediately
start If Delay
Hours are in the Program
Memory,
the dishwasher
will start the delay
count down.
To change
the dishwashing
program
in PRO-
GRAM MEMORY:
1. Touch PROGRAM MEMORY pad
once. The dis-
play
will show the set Program,
Options
and
Delay
Hours (if selected).
2. Touch in the new Program,
Options
and/or
De-
lay Hours you want. NOTE: If you want to cancel
Delay
Hours, the hours must be advanced
to
the blank
that comes
after the 9.
3. Touch
PROGRAM
MEMORY
pad
a second
time. This enters the selected
Program,
Options
and Delay Hours into the dishwasher's
memory,
NOTE: Each step must be completed
within IS
seconds.
If not completed
in 15 seconds,
the
old Program,
Options
and Delay
Hours will re-
main as they were.
In case
of a power
interruption
or failure:
The PROGRAM MEMORY will be erased.
Reset the
'ROGRAM
MEMORY for the Program,
Option
and
Ielay
Hours you want.
10
Advertisement
Table of Contents
