Advertisement
6
7
ASSEMbLY STEP 5: Frame alignment is critical for successful assembly
1. Square up the coop framework first, before applying
the roof panels. This is the single most-important step you
can take to guarantee the best roof alignment. An aligned
frame will result in a more solid, stable assembly and
nicer finished product.
2. Position the roof panels in place over the chicken run
area. Check alignment. Position the roof panels over the
SKEWED FRAME = BAD!
465 — 05 / 20 — A4.2
For successful assembly of your 4–6 hen Chicken Coop
MODEL #
465
Follow this pecking order
Instructions online at www.prevuepet.com
LEVEL = GOOD!
SPECIAL ATTENTION NOTICE
Just slide the frame-
work over to realign.
For more wonderful cages, toys, and accessories for cats, birds, chickens, rabbits, ferrets, dogs and small animals, visit www.prevuepet.com
FIND A LEVEL SURFACE
Build your coop on a flat surface and, with a friend, carry it to the location where
it will be used. Assembling the coop on the flattest surface available will help
you greatly when squaring up panels and aligning the roof panels.
coop house area. Check alignment.
3. When all panels have been placed in position and
aligned, then attach each with the appropriate screws.
REMEMbER: DO NOT screw the roof panels down until the
coop frame has been squared up and all roof panels have
been laid in position and evenly aligned.
COOP
HOUSE
CHICKEN
RUN
NOT LEVEL = NOT GOOD
ALIGNED FRAME = GOOD!
The view of the coop
framework from above
shows good alignment
of all coop and
chicken run panels.
COOP
HOUSE
CHICKEN
RUN
Advertisement
