Advertisement
Quick Links
Chicken Coop
4–6 Hens
Model: #465
Instructions online at www.prevuepet.com
CARE ADVISORY:
a non-toxic sealant and protect it with a tarp or other covering during extended periods of inclement weather.
TOOLS REQUIRED
• Small rubber mallet or hammer for wood pegs
• Phillips-head screwdriver for all screws;
if a power drill is used, do not over-tighten—
Prevue is not responsible for damage
1
To assemble the MAIN COOP
HOUSE, you will need these
pieces:
P
P3
465 — 09 /16 — USL
To maintain the longevity of your purchase, we recommend that you periodically treat it with
P
× 16
Tap wood pegs
[P] into predrilled
holes indicated
by the
symbol.
Align wood pegs with
predrilled guide holes.
Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800] 243-3624 • customerservice @ prevuepet.com
INSTRUCTIONS REVISED DUE TO CHANGES IN MANUFACTURING / PRODUCTION
read first
REVIEW BEFORE ASSEMBLY
• Some tools (not included) are required
for assembly — see below
• For best results, follow steps in order
• Please follow the CARE ADVISORY
to maintain product longevity
HARDWARE INCLUDED
P
P1
P2
P3
28ct
4ct
8ct
22ct
(spares are included but not reflected in counts)
P3
× 8
For assistance or replacement parts,
please contact Prevue Pet Products:
312.243.3624
PHONE
www.prevuepet.com
ONLINE
EMAIL customerservice@prevuepet.com
P4
P5
P6
56ct
40ct
6ct
Attach panels
with [P3] screws.
KEY TO HARDWARE SYMBOLS
P = wood pegs (Steps 1, 2, 4 )
P1 = 2⅜" screw (Step 4 )
P2 = 2" screw (Step 2)
P3 = 1¾" screw (Steps 1, 3 , 4)
P4 = 1⅜" screw (Step 5)
P5 = 1" screw (Steps 3, 5)
P6 = ⅝" screw (Step 3)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Prevue Hendryx Prevue Pet Products 465
Summary of Contents for Prevue Hendryx Prevue Pet Products 465
- Page 1 INSTRUCTIONS REVISED DUE TO CHANGES IN MANUFACTURING / PRODUCTION Chicken Coop read first REVIEW BEFORE ASSEMBLY 4–6 Hens • Some tools (not included) are required For assistance or replacement parts, for assembly — see below please contact Prevue Pet Products: • For best results, follow steps in order 312.243.3624 PHONE Model: #465...
- Page 2 To install the ROOF ROOF EXTENDERS EXTENDERS, FLOOR PANELS, and PERCH BARS, you will need these pieces: × 8 × 8 Tap wood pegs [P] into Align the wood pegs predrilled holes indicated in the roof extenders by the symbol. with predrilled guide holes on coop door frame.
- Page 3 To assemble the NEST BOX, you will need these pieces: × 4 Attach nest box ends with [P3] screws. × 4 Insert the floor in place. Attach the divider-stop bar onto the nest box floor with Then, insert [P3] screws. the dividers.
- Page 4 To assemble the CHICKEN Align the side panels with RUN, you will need these × 4 the main coop and attach pieces: with [P ] screws. Align the front panel with × 6 the side panels and attach with [P3] screws. ×...
- Page 5 To assemble the ROOF, you will need these pieces: Lay all roof panels in INSIDE ENDS position before attaching. Align the predrilled guide holes in the roof panels with the wood pegs along the roof lines. Numbers have been stamped onto the panels as guides.
Need help?
Do you have a question about the Prevue Pet Products 465 and is the answer not in the manual?
Questions and answers