2.2 Remote Function Table
This table supplements the infor-
mation you've just read. Use it to
quickly review button functions. The
controller's capabilities are extensive
and may be somewhat intimidating at
first. However, you will soon find that
its logical button arrangement and
programming capabilities will greatly
increase your enjoyment as you dis-
cover the ease with which you can
operate your entire system from just
one remote!
BUTTONS
Main
MAIN
Selects Main
VID 1
Selects Video 1
VID 2
Selects Video 2
VID 3
Selects Video 3
VID 4
Selects Video 4
VID 5
Selects Video 5
TUNER
Selects Tuner
CD
Selects CD
POWER
Power On/Off
MUTE
Mute Volume
VOLUME UP
Master Volume Up
VOLUME DOWN
Master Volume Down
TAPE
Selects Tape
EXT 5.1
Selects Ext 5.1
D. RANGE
Dynamic Range adjust
STOP
Not programmable
MODE
Surround Mode Select
PAUSE
Not programmable
PLAY
Not programmable
SETUP/UP
Not programmable
RIGHT
OSD Right Select
DOWN
OSD Scroll Down
| ADCOM GTP-860 II Owner's Manual
18
Look down the left-hand column until
you see the button you want to learn
about. Then look under MAIN to see
if it is pre programmed for a GTP-
860II function, under CD to see what
CD commands are pre programmed,
and under TUNER to see all pre pro-
grammed tuning functions.
NOTES: Direct sunlight or very bright
ambient lighting may affect the oper-
ating range and angle for the remote
control handset.
CD
Selects Main
Selects Video 1
Selects Video 2
Selects Video 3
Selects Video 4
Selects Video 5
Selects Tuner
Selects CD
Power On/Off
Mute Volume
Master Volume Up
Master Volume Down
Programmable
Programmable
Programmable
Stop CD
Surround Mode Select
Pause CD
Play CD
Programmable
Skip Ahead
Programmable
The infrared remote control command
receiver, located to the right of the
Power button, receives commands
from the remote control. There must
be a clear line-of-sight path from the
remote control to this window; if that
path is obstructed, the remote con-
trol may not work.
Tuner
Selects Main
Selects Video 1
Selects Video 2
Selects Video 3
Selects Video 4
Selects Video 5
Selects Tuner
Selects CD
Power On/Off
Mute Volume
Master Volume Up
Master Volume Down
Programmable
Programmable
Programmable
Programmable
Surround Mode Select
Programmable
Programmable
Programmable
Programmable
Programmable
All Others
Selects Main
Selects Video 1
Selects Video 2
Selects Video 3
Selects Video 4
Selects Video 5
Selects Tuner
Selects CD
Power On/Off
Mute Volume
Master Volume Up
Master Volume Down
Programmable
Programmable
Programmable
Programmable
Surround Mode Select
Programmable
Programmable
Programmable
Programmable
Programmable
continued on opposite page.
Need help?
Do you have a question about the GTP-860II and is the answer not in the manual?
Questions and answers