Do you have a question about the GTP-600 and is the answer not in the manual?
Questions and answers
Donald Jenkins
January 23, 2025
Trouble shooting. Right will not play
1 comments:
Mr. Anderson
February 10, 2025
1. Check Connections: Ensure all cables are securely connected to the right channel output and the amplifier. Swap the cables with the left channel to see if the issue moves. 2. Center Channel Mode: Verify the Center Mode switch setting. If using a smaller center speaker, set it to "Normal" to avoid distortion. 3. Video Mode Selection: Confirm that the correct video mode (composite or S-video) is selected on the rear panel. 4. Inspect for Damage: If the unit was recently moved or shipped, check for physical damage and notify the dealer if necessary. 5. Power Cycle: Turn off all components, wait a few minutes, and turn them back on. 6. Test with Another Speaker: Connect the right channel output to a different speaker to determine if the issue is with the speaker or the receiver. 7. Amplifier Check: If using an external amplifier (e.g., GFA-6000), test it separately to ensure it's functioning properly.
If the issue persists, consult an ADCOM dealer for further assistance.
Need help?
Do you have a question about the GTP-600 and is the answer not in the manual?
Questions and answers
Trouble shooting. Right will not play
1. Check Connections: Ensure all cables are securely connected to the right channel output and the amplifier. Swap the cables with the left channel to see if the issue moves.
2. Center Channel Mode: Verify the Center Mode switch setting. If using a smaller center speaker, set it to "Normal" to avoid distortion.
3. Video Mode Selection: Confirm that the correct video mode (composite or S-video) is selected on the rear panel.
4. Inspect for Damage: If the unit was recently moved or shipped, check for physical damage and notify the dealer if necessary.
5. Power Cycle: Turn off all components, wait a few minutes, and turn them back on.
6. Test with Another Speaker: Connect the right channel output to a different speaker to determine if the issue is with the speaker or the receiver.
7. Amplifier Check: If using an external amplifier (e.g., GFA-6000), test it separately to ensure it's functioning properly.
If the issue persists, consult an ADCOM dealer for further assistance.
This answer is automatically generated