Table of Contents
Advertisement
INSERTING AND ACTIVATING THE BATTERIES
1 .
Remove the Battery Case from the Battery Pocket .
2 .
Using a screwdriver, remove the screw from the back of the Battery Case and
slide the back off of the Battery Case .
3 .
Insert two AA batteries (included), following the polarity indicators .
4 .
Slide the back onto the Battery Case, pressing to insert the tab into the slot at
the bottom of the case .
5 .
Slide the Battery Activation Switch to the ON position .
6 .
Reinsert the Battery Case into the Battery Pocket .
OPERATION
1 .
Follow the above instructions to insert and activate the batteries .
2 .
Position the massager where you can lie on it or press against it comfortably .
3 .
The massager can be used with or without vibration . For vibration, press the
Power Button to turn on the massager at low vibration intensity . Press again for
high vibration intensity .
4 .
Press the Power Button a third time to turn off the massager .
8
TROUBLESHOOTING
PROBLEM
The product does not work
Ensure that the batteries are not depleted .
Ensure that the batteries have been inserted in the correct polarity
position (positive and negative ends correctly aligned) .
Press the Power Button . Pressing once turns the massager on low
vibration intensity . Pressing a second time turns on high vibration
intensity . Pressing a third time turns the massager off .
There is a motor sound
The motor is a mechanical mechanism and makes a humming sound
during operation
during operation . This is normal .
CARE AND MAINTENANCE
•
Spot clean only .
•
Wipe dust and dirt off the massager with a dry, soft cloth after use .
•
Keep the massager clean and away from places of high humidity .
•
Remove the batteries when not in use .
POSSIBLE CAUSE/ACTION
9
Advertisement
Table of Contents
