Using Your Dishwasher - Whirlpool DU4000 Series Use And Care Manual

Using Your Dishwasher
In This Section
Page
Page
Before starting your dishwasher.. .... .
Using the detergent dlspenser.. ........ .
Starting your dishwasher .................. .
Uslng the rlnse agent dispenser.. .. .10
Adding a dish during a cycle.. ........... .
Quiet operating tlps .......................... 11
Changing a cycle setting .................. .7
Water temperature tlps ................... .12
Canceling a cycle ............................... 7
Energy saving tips ............................ 12
Cycle selection chart .......................... 6
Speclal tlps on dlshwasher use .... ..13
What happens in each option.. .......... .
Operating your dishwasher properly enables you to obtain the best possible results. This
section explains proper dishwasher operation.
Before starting your dishwasher
1. Properly load the top rack, bot-
tom rack, and thesilverware bas-
ket. See pages 14-16.
4. Check the rinse agent dispenser.
See pages 10 and 11.
2. Spin the lower spray arm with
lower rack in place to make sure
nothing prevents arm from turn-
ing freely.
3. Add detergent. See pages
9 and 10.
5. Push door firmly when closing
and it will automatically latch.
6. Run hot water at sink nearest
dishwasher until water is hot.
Turn off water.
Starting your dishwasher
The dishwasher will wash and dry dishware according to the selections you make on the
control panel.
Hold cycle.
2. For the 6400 series models:
Push a Cycle Selector button for the
desired cycle. Normal Wash, Light Wash
and Rinse & Hold cycles share the same
button.The Cycle Control knob deter-
mines which cycle operates.
On some models
On some models
6