Sony HKC-WL50 Installation Manual page 8

3. Remove the three screws, and then remove the antenna bracket.
4. Install the transmission antenna and the receiving antenna to the antenna bracket.
Note
To install the transmission antenna, use the nut supplied with HKC-WL50.
5. Attach the antenna cushion.
Note
• Align the antenna cushion with the reference line shown in the figure below.
• Remove portion A of the antenna cushion, if necessary.
Transmission antenna
Receiving antenna
Antenna cushion
Antenna cushion attachment position
Antenna
bracket
Reference line
PSW3 x 6
Antenna bracket
Antenna bracket
Nut
(Supplied with HKC-WL50)
Portion A
Reference line
Antenna cushion
6