Page 1
SI Series 1.5-20KW Pure Sine Wave Low Frequency Solar Hybrid UPS Inverter with built-in PWM Solar Charger Tel:+86 757 8258 0189 Fax:+86 757 8258 9791...
Ⅰ.Operating Instruction 1-1. Open-package inspection 1). After opening the package, please check the accessories and components, including operation manual and checking whether the inverter is in good condition? If Content inverter broken or components missing, do not turn on the machine, feedback to the carrier or supplier.
Ⅲ. Description of front board 2. 4000W / 5000W / 7000W Series Meaning of indicate lamp&button Working mode Battery mode AC voltage Output voltage AC mode Fault Buzzer AC input Load Turn on or turn off Down Function Solar module Battery Ⅳ.
Ⅴ. Connection way of input & output 1.Main interface data: Connect with AC input and load output by connecting terminal, load oputput can connect both by terminal blocks and output plug. Note: Output plug only can connect with each load less than 1500W. Back panel illustration Battery negative polarity connection Main interface...
Ⅷ. Care and maintenance 1). This series of products seldom need to be fix. The standard model battery is like a adjusting tap. Low maintenance, ensuring better life only by charging often. When connecting to mains supply, no matter whether the inverter is on or not, it still keeps charging for battery, and provides over charge, over discharge protection.
Need help?
Do you have a question about the LSI Series and is the answer not in the manual?
Questions and answers