Advertisement
Once the module has booted, an Entry screen will be displayed on the attached PC. If
a password has been configured, enter the password and press <ENTER>. A system
prompt, '>', will be displayed. At the module prompt (>), enter ?, help or h to view the
command options.
6) Verify Operations
Verify the module is operational by viewing the status of the LED indicators. The table
below provides a description for each LED indicator.
The Power LED(s) indicate the module is receiving power from the external power source.
The port LEDs indicate the state of connection between link partners. A blinking port
activity LED indicates the presence of data.
LED Function
Color
OFF State
"Legend"
Power
Green/
No power
"Pwr A"
Yellow
Power
Green/
No Power
"Pwr B"
Yellow
(Dual power models only)
P1, P2, P3 Link/Act
Green
Port not linked
"10G"
P1, P2, P3 Link/Act
Green
Port not linked
"1G"
(SFP+ models only)
P4, P5, P6, P7 Link/Act
Green
Port not linked at
"100"
100M
P4, P5, P6, P7 Link/Act
Green
Port not linked at
"1G"
1G
P4, P5, P6, P7 Link/Act
Green
Port not linked at
"100 and 1G"
10M
Mgmt
Green
Port not linked at
"100"
100M
(Located on the back)
Mgmt
Green
Port not linked at
"1G"
1G
(Located on the back)
Mgmt
Green
Port not linked at
"100" and "1G"
10M
(Located on the back)
LED Indicators
ON/Blinking State
Solid Green: Module has power
Blinking Yellow (10Hz): Fan Alarm
Solid Green: Module has power
Blinking Yellow (10Hz): Fan Alarm
Solid Green: Port linked at 10G
Blinking Green (10Hz): Data activity
Blinking Green (1Hz): Energy detected but no link
Solid Green: Port linked at 1G
Blinking Green (10Hz): Data activity
Blinking Green (1Hz): Energy detected but no link
Solid Green: Port linked at 100M
Blinking Green (10Hz): Data activity
Blinking Green (1Hz): Far-end fault detected but
no link
Solid Green: Port linked at 1G
Blinking Green (10Hz): Data activity
Blinking Green (1Hz): Auto-negotiation detected
but no link
Solid Green: Port linked at 10M
Blinking Green (10Hz): Data activity
Solid Green: Port linked at 100M
Blinking Green (10Hz): Data activity
Blinking Green (1Hz): Far-end fault detected but
no link
Solid Green: Port linked at 1G
Blinking Green (10Hz): Data activity
Blinking Green (1Hz): Auto-negotiation detected
but no link
Solid Green: Port linked at 10M
Blinking Green (10Hz): Data activity
Page 11
Specifications
iConverter
XM5
Description
10G Network Interface Device
IEEE 802.1Q, 802.1ad, 802.1p, 802.3, 802.3ah, 802.1ag,1588v2
RFC 2819 (RMON), 2863 (IF-MIB), 2131 (DHCP), 2544
Standard
ITU-T G.8031, G.8032, G.8262, Y.1731, Y.1564
Compliances
MEF Carrier Ethernet 2.0 Certified
MEF 6.2, 9, 10.2, 14, 21, 26.1, 30, 31, 33
Management
Telnet, SNMPv1, SNMPv2c, SNMPv3, SSH, Serial Console
Regulatory
UL, CE, FCC Class A, NEBS, RoHS, WEEE, REACH
Compliances
Frame Size
Up to 10,056 bytes
Copper:
10/100/1000BASE-T (Fixed RJ-45)
Fiber:
1G SFP:
10G SFP+: 10GBASE-R, 1000BASE-X, 10/100/1000BASE-T
10G XFP: 10GBASE-R
Port Types
Serial:
RS-232 (RJ-45)
(Management)
Copper:
10/100/1000BASE-T (RJ-45)
(Management)
Copper:
EIA/TIA 568 A/B, Category 5 and higher
Fiber:
Multimode: 50/125um, 62.5/125um
Single-mode: 9/125um
Cable Types
Serial:
EIA/TIA 568 A/B, Category 3 and higher
(Management)
Copper:
EIA/TIA 568 A/B, Category 5 and higher
(Management)
AC Power
AC Power Adapter:
100-240VAC~ 50-60Hz
Requirements
0.6A @ 110VAC
2.5mm Barrel
12VDC
Connector:
Maximum power consumption 48W
DC Power
Requirements
3-Pin Terminal:
+/- 20 to 60VDC inclusive of tolerance
Maximum power consumption 48W
Commercial:
Wide:
-40 to 60° C
Temperature
Extended:
-40 to 75° C
Storage:
-40 to 80° C
Dimensions
7.29" x 9.15" x 1.63" (185.17 mm x 232.41 mm x 41.4 mm)
(W x D x H)
Weight
3.24 lbs (1.47 kg)
Humidity
5% to 95% (non-condensing)
Altitude
-100m to 4,000m (operational)
Warranty
3 year warranty
1000BASE-X,10/100/1000BASE-T, 100BASE-X
0 to 50° C
040-09600-001B 9/20
Page 12
Advertisement
