User Manual - SBS Bluetooth Monopod Pro User Manual

UK
USER'S GUIDE
BATTERY:
Attention before to use the device, inserted inside the remote a
battery CR2016 (supplied), following the correct polarity.
PAIRING:
1. Turn on the remote control by moving the side key to ON: a flashing
blue LED will indicates that the remote control is searching. Tip: turn
off the remote control when not in use to conserve battery power.
2. Activate wireless research on your smartphone and select the
remote control from the list of available devices -if required press
ok to confirm.
3. Turn on the your smartphone camera.
4. Attach your smartphone to support after adjusting the length of
the straps.
5. Adjust the length of the rod, then turn right to lock, to the left to
unlock and close.
6. You can now take pictures by pressing the button on the remote
control.
CARE AND MAINTENANCE:
1. Clean with a soft, damp cloth.
2. Do not use abrasive cleaners.
3. Do not immerse in water or other liquids.
4. Keep away from heat.
5. Dispose of and recycle according to current regulations in the
country of use.
SUPPORTED SYSTEMS:
Android > 4.2.1, iOS > 6.0
NB: Android is Open Source System, changes of some manufacturers
might prevent the proper use of the remote .
4