Advertisement
Table of Contents
Installation Instructions
Parts List
|
1
x fitting No. 4
2
Fitting Kit
|
1
x uriLOCK 0.3 L
1
x uriCLEAN 0.5 L
Note
|
Installation of the uridan waterless urinal is very
simple.
If you are retrofitting existing flushing urinals with uridan
waterless urinals, please ensure that the sewer line is jetted
and clean of uric scale before installation. Please also
remove any existing s-trap to avoid double trapping the
urinal.
The uridan urinals work without water, and must be fitted
to a 50mm waste pipe. Installation should be carried out
by authorized plumbers in accordance with AZ/NZS3500.2.
PLEASE NOTE: The undiluted discharge from a waterless
urinal must not be transported through copper or copper
alloy pipework.
GHMA-10 Installation Instructions – May 2020
x screws fitting No. 4
1
x uriCLOTH
1
x 87° bend
1
x Cover
www.uridanaustralia.com.au
1
x suction device
Advertisement
Table of Contents
Related Manuals for URIDAN SUMS+
Summary of Contents for URIDAN SUMS+
- Page 1 Please also remove any existing s-trap to avoid double trapping the urinal. The uridan urinals work without water, and must be fitted to a 50mm waste pipe. Installation should be carried out by authorized plumbers in accordance with AZ/NZS3500.2.
- Page 2 ADMIRAL MINI GHMA-10 glass reinforced plastic (GRP) | | horizontal waste 100mm Installation 1. Mark holes for fitting No. 4 and secure on wall. 2. Insert extension pipe (D) on the 87 ° bend (C). Keep a distance of 100 mm from the wall to the middle of the pipe.
Need help?
Do you have a question about the SUMS+ and is the answer not in the manual?
Questions and answers