General Information; To The Owner; Owner's Responsibility - Beckett CG10-24 Manual

With genisys 7590 control
Table of Contents

Advertisement

Thank you for purchasing a Beckett CG10 gas
burner for use with your heating appliance. Please
pay attention to the Safety Warnings contained within
this instruction manual. Keep this manual for your
records and provide it to your qualified service agency
for use in professionally setting up and maintaining
your burner.
Your CG10 burner will provide years of efficient
operation if it is professionally installed and maintained
by a qualified service technician. If at any time the
burner does not appear to be operating properly,
immediately contact your qualified service agency
for consultation.
Gas equipment and their vent systems must be
inspected annually by a qualified service agency to
assure safe and reliable operation.

General Information

To the Owner:

This equipment must be installed, adjusted and started
by a qualified service agency that is licensed and
experienced with all applicable codes and ordinances
and responsible for the installation and commissioning
of the equipment.
Hazard Definitions:
Indicates a hazardous situation
that, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
that, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
that, if not avoided, could result
in minor or moderate injury.
Used to address practices not
related to physical injury.
Safety instructions signs
indicate specific safety-related
instructions or procedures.
Burn Hazard, Hot Surface
Burner flange and air tube are hot
when burner is in operation. Do not
service this area during or
immediately after operation. Allow
area to cool.
Burner Manual — CG10-24
Section: GENERAL INFORMATION

Owner's Responsibility:

Explosion, Fire, and
Asphyxiation Hazard
Failure to follow these instructions,
misuse, or incorrect adjustment of the
burner could lead to equipment
malfunction.
Contact a professional, qualified service agency for
the installation, adjustment and service of your gas
burning system. Thereafter, have your equipment
adjusted and inspected at least annually to ensure
reliable operation. This work requires technical
training, trade experience, licensing or certification
in some states and the proper use of special
combustion test instruments.
Please carefully read and comply with the
following instructions:
See the front cover for 'What to do if you smell gas'.
Never store or use gasoline or other flammable
liquids or vapors near this burner or appliance.
Never attempt to burn garbage or refuse in
this appliance.
Never attempt to light the burner/appliance by
throwing burning material into the appliance.
Never attempt to burn any fuel not specified and
approved for use in this burner.
Never restrict the air inlet openings to the burner or
the combustion air ventilation openings in the room.
Frozen Plumbing and
Water Damage Hazard
If the residence is unattended in severely cold
weather, burner primary control safety lockout,
heating system component failures, power
outages or other electrical system failures could
result in frozen plumbing and water damage in a
matter of hours. For protection, take preventive
actions such as having a security system installed
that operates during power outages, senses low
temperature and initiates an effective action.
Consult with your heating contractor or a home
security agency.
Contact a professional, qualified
service agency to replace any
component that has been exposed to water.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents