Table of Contents
Advertisement
INSTALLATION
Videoconference camera mounting
DynamicVision is compatible with a wide range of video conferencing
camera models. Ask the manufacturer of your video conference
camera for any issue related to it.
• Install the mount motorised lift enclosure to the wall, as described in the
previous page.
• Attach the video conferencing camera to the platform with the
most appropriate screws, under the camera model. If you have any
questions, please ask the video conference camera's manufacturer.
• Push the control button on the remote control, to lift the cover. The
DynamicVision's cover will then open and the tray will move horizontally
outward.
• Place now the platform with the camera already fixed and connected
(recommended) in the DynamicVision's movable tray.
• Fit the platform to the tray through a key system (see picture below). Set
it up with a metric hexagon nut.
11
Advertisement
Table of Contents
