Motorised wall mount for video conference cameras (16 pages)
Summary of Contents for ARTHUR HOLM MicConnect
Page 1
User Guide MicConnect XLR microphone shock mount Technology Serving Desing Danish craftmanship Mediterranean soul...
Page 3
WELCOME Thank you for purchasing an ARTHUR HOLM product. Our product range has been designed in order to create the perfect look, where technology is part of the interior design as well as beign used as a communication tool. Please, read this installation and operating instructions carefully and keep them in a safe place for future reference.
TABLE OF CONTENTS SAFETY INSTRUCTIONS APPLICATIONS FEATURES CONTROLS CONNECTORS WARRANTY TERMS...
Page 6
EC REGULATIONS AND SECURITY ATTENTION: Do not disassemble or modify the device in any way. This symbol warns of the presence of dangerous un-insulated voltages inside some of the components, of sufficient magnitude to expose people to risk of electronic shock. This symbol draws attention to important use and maintenance instructions in the manual that accompanies the unit.
SAFETY INSTRUCTIONS Environment Avoid exposing the equipment to: • Rain or water • Excessive heat, cold or humidity • Area exposed to direct sunlight • Dirty areas • Equipment generating strong magnetic fields Avoid placing open containers of liquid, near the equipment. Never place above the device any sources of flames such as lighted candles, etc.
APPLICATIONS MicConnect is a passive microphone surface mount for XLR microphones with an integrated shock mount. It consists of a XLR connector with a cover plate, to be integrated into the furniture. There is a contact switch to externally control conference systems, and two LED indicators to be externally activated.
When a microphone is connected, use this button to externally control the conference system. On the connectors, there is a contact close from this button to externally control conference systems. 3. LED1: Activate this LED applying 5VDC on MicConnect. 4. LED2: Activate this LED applying 5VDC on MicConnect.
CONNECTORS Microphone and switch/LEDs connectors are located under the unit: • Button: Contact close of the cover plate push button. • LED_R+/LED_R-: Apply 5VDC to activate LED2 on cover plate. • LED_G+/LED_G-: Apply 5VDC to activate LED1 on cover plate.
Page 11
INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC EQUIPMENT This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to the designated collection points, where they will be accepted on a free of charge basis.
WARRANTY TERMS AND CONDITIONS Albiral Display Solutions warrants this product against manufacturing defects and workmanship for a period of two (2) years from the date of purchase, subject to the conditions below. Electrical, electronic boards, accessories and power supply are warranted against manufacturing defects and workmanship for a period of two (2) years from the date of purchase.
Need help?
Do you have a question about the MicConnect and is the answer not in the manual?
Questions and answers