Pin Method; Enter The Pin From Your Ap Device - TP-Link TL-WN7200ND User Manual

3. When the following window appears, you have successfully connected to the network.
Click OK to finish the WPS connection.

3.2.2 PIN method

There are two ways to configure the QSS by PIN method:
1)

Enter the PIN from your AP device.

2) Enter a PIN into your AP device.
Following are detailed configuration procedures of each way.
3.2.2.1. Enter the PIN from your AP device
1. Open TWCU and click QSS tab. Select Enter the PIN of my access point or wireless
router. In the empty field beside PIN, enter the PIN labeled on the bottom of the router
TL-WN7200ND 150Mbps High Power Wireless USB Adapter
Figure 3-10
Figure 3-11
14