Pin Method - TP-Link TL-WN822N User Manual

3.2.2 PIN method

There are two ways to configure the WPS by PIN method:
1) Enter the PIN from your AP device.
2) Enter a PIN into your AP device.
Following are detailed configuration procedures of each way.
3.2.2.1. Enter the PIN from your AP device
1. Open TWCU and click WPS tab. Select Enter the PIN of my access point or wireless
router. In the empty field beside PIN, enter the PIN labeled on the bottom of the router
(here takes 13492564 for example). If you have generated a new PIN code for your router,
please enter the new one instead. Click Connect to continue.
2. The adapter will be connecting to the target network.
3. When Figure 3-12 appears, you have successfully connected to the network.
TL-WN822N 300Mbps Wireless N USB Adapter
Figure 3-13
Figure 3-14
15