Pin Method - TP-Link TL-WN781ND User Manual

TL-WN781ND

3.2.2 PIN method

There are two ways to configure the WPS by PIN method:
1) Enter the PIN from your Router or AP device.
2) Enter a PIN into your Router or AP device.
( Note: This method is only available in Windows XP and Windows Vista.)
Following are the detailed configuration procedures of each way.
3.2.2.1. Enter the PIN from your Router or AP device
1. Open and click WPS tab. Select Enter the PIN of my access point or wireless Router. In
the empty field beside PIN, enter the PIN labeled on the bottom of the Router (here takes
13492564 for example). If you have generated a new PIN code for your Router, please
enter the new one instead. Click Connect to continue.
150Mbps Wireless N PCI Express Adapter User Guide
Figure 3-11
Figure 3-12
16