Refitting Components - Bosch 12/18 Instruction Manual
Floor standing external oil fired condensing combination boiler using balanced flue system
Hide thumbs
Also See for 12/18:
- User instructions & customer care manual (20 pages) ,
- Users instructions and customer care manual (16 pages) ,
- Instruction manual (56 pages)
Table of Contents
Advertisement
F
E
INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR HEATSLAVE EXTERNAL 12/18-18/25-25/32
8 716 113 389b (09/07)
REFITTING COMPONENTS
1
Align burner combustion head (A) into boiler
housing tube with gasket (B) correctly fitted.
Push firmly down to compress the gasket (B).
Tighten burner retainers (C) sufficiently to
ensure a good seal.
IMPORTANT: Ensure the gasket is a good
seal between the burner combustion head
and the boiler housing to prevent flue gases
escaping from the combustion chamber
into the cabinet.
B
Attach the flexible air duct and tighten
A
clamp(D) to secure to the burner air intake.
C
2
Plug burner lead (E) into control box (F).
D
REFITTING COMPONENTS
26
Hide quick links:
Advertisement
Table of Contents
