Installing the NIC Module
This system comes with 1 NIC Ethernet module slot for network bandwidth expansion. Please follow the
steps for installation.
1. Rotate the two lock-screws
counterclockwise and loosen them.
2. Remove the door and locate the PCIe
slot for module insertion.
3. Insert your NIC Ethernet module. (The
module shown in the image below is
for reference only).
4. Once the module is firmly seated,
rotate clockwise and tighten the two
lock-screws.
37
PCIe Slot
Align the gold fingers to the PCIe slot
on the motherboard carefully while
inserting this module.