Engine Starting; Engine Running-In - LONCIN LX250GY-3 Manual

Engine starting

.
1 Put ignition key on position of "
.
2 Put emergency switch on position of "
.
3 Confirm neutral gear and its indicator is on.
.
4 Confirm fuel amount.
.
5 Fuel valve is on position of "
★ Engine's cold starting
1.Draw up choke lever on carburetor(Turn off choke
lever).
～
2.Turn 1/8 1/4 round of accelerator.
3.Start by electricity or foot.
4.Slightly turn greaser grip, speed up engine rotation
for heating.
5.Turn down choke lever when engine completely
heated,totally open choke valve.
★ Caution:
No starting allowed before neutral gear confirmed,
or may lead to accident. Idle running is unnecessary
and bad for engine(especially in high speed).
Warning:
No starting allowed in room with poor ventilation or without ventilators. Because the CO gas is a rank poison.
No leaving allowed when engine is under working status.
12
".
".
".
：
★Engine turning off
1. Relax greaser grip, and slow down the engine.
2. Put on neutral position.
3. Lay ignition switch on position OFF
（
4. Fuel valve Fuel tank switch is on position"O".

Engine running-in

The first 1000km is the running-in period.
In running-in period, please pay attention to these
issues below:
1. No heavy load and steep slope is allowed.
continuous driving more than 50km is not allowed.
2.Pre-heating for
starting for sufficient lubrication for moving parts.
3.No faster than 40km/h in the first 500km.is
allowed, the second 500km mileage should be no more
than 55km/h.
）
～
3 5 minutes before each