Mp3/Jpeg/Compressed Video Playback; How To Create A Playlist - Telefunken TF-DVD5062 Instruction Manual

Create ID3 Yes
For navigation in the menu use cursor
buttons and press ENTER to confirm your
choice. In the "Options" column you may set
speed and bitrate for ripping. In "Track" you
may select tracks for ripping (press ENTER to
select a highlighted track). Besides, you can
select all tracks ("Select all") or cancel your
choice ("Select none"). To start converting,
select "Start" and press ENTER.
MP3/JPEG/compressed video
playback
MP3 - generally adopted standard of audio
compression, compressing audio data to 1/12
of their size. One CD disc may store more than
600 minutes of music (170 songs). And the
quality of MP3 approximates to the audio CD
quality.
JPEG (Joint Photographic Expert Group) -
image compression algorithm used all over the
world and providing high level of compression
of the source data. Any graphics editor may
edit images of this format and their size in 15-
20 times less than the original.
Manufacturer guarantees regular
playback of licensed discs only. Some DivX
discs cannot be played due to their parameters
and recording conditions. AVI video files
exceeding 2 GB in size may be played
incorrectly.
When a disc or a USB containing files of
supported formats is inserted, the following
menu interface will appear:
1 2
1. Playback info window - shows current
playback time, track number, volume level,
playback status (stop/play/pause), etc.
2. Address window - shows directory address
at which the currently played file is found.
3. Directory window - shows the currently
selected directory.
Use cursor buttons to select the directory
you want and press ENTER to enter it. Select a
file and press ENTER to start its playback.
While playing JPEG files press STOP to
go back to the menu.
Press cursor buttons to rotate the picture in
different directions.
Regardless of the picture size and format, a
picture may possibly not be shown stretched in
full screen, leaving black stripes.

How to create a playlist

In the above menu, press PROG to enter the
File list mode. In this mode all files (including
all files in all directories) will be displayed in
Operation
3
13
13