Advertisement
Quick Links
KTI-63133A
3-1/3 TON LOW PROFILE SERVICE JACK
OWNER'S MANUAL
KTI-63133A
WARNING:
Cancer and Reproductive Harm-
www.P65Warnings.ca.gov
SPECIFICATIONS
Capacity ......................................................................... 3-1/3 Ton
Low Height ..............................................................................3-3/4"
High Height ........................................................................ .... 21-3/4"
Pump Stroked to Load ............................................................... 8
Chassis Length ..................................................................... 28-1/3"
Overall Width ......................................................................... ......14"
Chassis Height .................................................................. 6-1/2"
Handle Length .......................................................................49-1/5"
Saddle Diameter .....................................................................4-7/10"
Net Weight .....................................................................97.02 lbs.
Gross Weight ..................................................................101.43 lbs.
Complies with ASME PASE/2014 Safety Standard
1
Advertisement
Related Manuals for K-Tool XD KTI-63133A
Summary of Contents for K-Tool XD KTI-63133A
- Page 1 KTI-63133A 3-1/3 TON LOW PROFILE SERVICE JACK OWNER'S MANUAL WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov SPECIFICATIONS Capacity ................. 3-1/3 Ton Low Height ................3-3/4" High Height ................21-3/4" Pump Stroked to Load ............... 8 Chassis Length ..............28-1/3" Overall Width ................14" Chassis Height ..............
- Page 2 WARNING INFORMATION This is the safety alert symbol. It is used to alert you WARNING: Indicates a hazardous situation WARNING to potential personal injury hazards. Obey all safety which, if not avoided, could result in death or serious injury. messages that follow this symbol to avoid possible injury or death.
- Page 3 INSPECTION jack which appears to be damaged in any way, is found to be badly worn, or operates abnormally MUST BE REMOVED FROM SERVICE until necessary repairs are made. Handle Upper Handle Yoke Handle Lock Lower Handle Lock Hole Screw Lower Handle Bumper...
- Page 4 OPERATING INSTRUCTIONS This is the safety alert symbol used for the OPERATING INSTRUCTIONS section of this manual to alert you to potential personal injury hazards. Obey all instructions to avoid possible injury or death. IMPORTANT: Before attempting to raise any vehicle, check vehicle service manual for recommended lifting surfaces.
-
Page 5: Regular Maintenance
HYDRAULIC MAINTENANCE GUIDE IMPORTANT: Service jacks are designed for lifting purposes only; always support raised load with jack stands. REGULAR MAINTENANCE MONTHLY or as necessary (depending on usage) #1 Using a grease gun, add grease to grease fitting in the lift arm pivot shaft. (Use a multi-purpose NLGI type grease only.) #2 Lubricate all linkages and pivot points. - Page 6 K-Tool International HD and XD service-related equipment 2 Year Limited Warranty. K-Tool International warrants that all jacks and service-related equipment will be free from defects in material and workmanship for a period of 2 years following the original date of purchase. This warranty is extended to the original retail purchaser only. If any jack or service-related item proves to be defective during this period, it will be replaced or repaired, at K-Tool International’s option, without...
- Page 7 KTI-63133A 3-1/3 TON LOW PROFILE SERVICE JACK EXPLODED DRAWING / PARTS LIST REF. # PART # DESCRIPTION REF. # PART # DESCRIPTION C ring Roller Axle Washer Roller KTP63133A03 Front Wheel C ring Left Side Plate Bolt Hook Hex Nut KTP63133A26 Handle Socket Washer...