Table of Contents
Advertisement
Quick Links
KTI-63105A
2 TON EXTRA LONG LOW PROFILE SERVICE JACK
OWNER'S MANUAL
KTI-63105A
WARNING:
Cancer and Reproductive Harm-
www.P65Warnings.ca.gov
SPECIFICATIONS
Capacity ............................................................................... 2 Ton
Low Height ............................................................................ 2-3/4"
High Height .............................................................................. 24"
Pump Stroked to Load ............................................................... 8
Chassis Length ....................................................................33-7/10"
Low Clearance Length .............................................................15"
Overall Width ........................................................................ 14-3/5"
Chassis Height ....................................................................... 5-1/2"
Handle Length .................................................................... 49-1/5"
Saddle Diameter .....................................................................3-9/10"
Net Weight .....................................................................100.94 lbs.
Gross Weight .....................................................................105.8 lbs.
Complies with ASME PASE/2014 Safety Standard
1
Advertisement
Table of Contents
Related Manuals for K-Tool KTI-63105A
Summary of Contents for K-Tool KTI-63105A
- Page 1 KTI-63105A 2 TON EXTRA LONG LOW PROFILE SERVICE JACK OWNER'S MANUAL WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov SPECIFICATIONS Capacity ................2 Ton Low Height ................2-3/4" High Height ................24" Pump Stroked to Load ............... 8 Chassis Length ..............33-7/10" Low Clearance Length .............15"...
-
Page 2: Warning Information
Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS could cause accidents resulting in serious or fatal personal injury and/or property damage. KTI-63105A... - Page 3 Proceed to pump the jack 15 full incremental pump strokes. Rotate the pump handle clockwise until it stops and proceed to pump the handle until the lift arm reaches maximum height. Repeat steps "A" through "C" until all air is purged from the system. KTI-63105A...
-
Page 4: Operation
ACTION: Purge air from hydraulic system as above. PROBLEM: UNIT WILL NOT LIFT TO FULL HEIGHT. ACTION: Purge air from hydraulic system as above or check oil level in reservoir. PROBLEM: HANDLE TENDS TO RAISE UP WHILE THE UNIT IS UNDER RATED LOAD. ACTION: Pump the handle rapidly several times to push oil past ball valves in power unit. KTI-63105A... -
Page 5: Regular Maintenance
(Use white lithium spray grease only.) Remove handle; lubricate handle receptacle and handle end. (Use white lithium spray grease only.) Lubricate both rear casters bearings and both front wheels. (Use white lithium spray grease only.) Tighten all accessible hardware. KTI-63105A... -
Page 6: Warranty
K-Tool International HD and XD service-related equipment 2 Year Limited Warranty. K-Tool International warrants that all jacks and service-related equipment will be free from defects in material and workmanship for a period of 2 years following the original date of purchase. This warranty is extended to the original retail purchaser only. If any jack or service-related item proves to be defective during this period, it will be replaced or repaired, at K-Tool International’s option, without... - Page 7 KTI-63105A 2 TON EXTRA LONG LOW PROFILE SERVICE JACK EXPLODED DRAWING KTI-63105A...
- Page 8 KTI-63105A 2 TON EXTRA LONG LOW PROFILE SERVICE JACK PARTS LIST REF. # PART # DESCRIPTION REF. # PART # DESCRIPTION C ring Cotter Pin Washer Washer KTP63105A03 Front Wheel KTP63105A26 Handle Socket Left Side Plate Bolt C ring Roller...