Getting Started - AEG PREMIUMLINE 7 Series Instruction Book

Getting started

1. Before first use, clean the mixing
GB
foot under running water. Before
inserting or removing mixing foot,
remove plug from power outlet.
Using the mini chopper*
*depending on model
4. Using the mini chopper*. Place
chopper bowl on a clean, level
surface. Put stainless steel blade into
place.
STM7xxx_Pragati_StickMixer_AEG_rev2.indd 19
B
A
2. Insert the mixing foot to handheld
part, turn clockwise (A) and lock into
position. To remove, turn mixing foot
counter clockwise (B).
5. Place food into the chopper bowl*.
Amount of food to be chopped
cannot exceed 300 g (Indicated max
level). Close the lid.
3. Insert the stick mixer deep into the
beaker, begin mixing by starting at
normal speed. Make sure the beaker
is no more than 2/3 (600 ml) full. If
you do not use the beaker, do not
immerse the mixing foot more than
2/3 of its length. Move stick mixer
lightly up and down to ensure best
processing of content. Release switch
to stop.
A
B
6. Insert handheld part into the
chopper lid, turn clockwise (A) and
lock into position. Plug into power
outlet and press switch to start.
Release to stop. Remove handheld
part by turning counter clockwise (B).
2015-01-15 11:27:04
D
GR
NL
F
GB
19