Panasonic LUMIX DMW-BTC10 Operating Instructions Manual page 4

(For the U.S.A. and CANADA)
Battery charger
This battery charger operates on AC between 110 V and 240 V.
But
• In the U.S.A. and Canada, the battery charger must be connected to a 120 V
AC power supply only.
• When connecting to an AC supply outside of the U.S.A. or Canada, use a
plug adaptor to suit the AC outlet configuration.
• When connecting to a supply of greater than AC 125 V, ensure the cord you use is
suited to the voltage of the AC supply and the rated current of the battery charger.
• Contact an electrical parts distributor for assistance in selecting a suitable
AC plug adaptor or AC cord set.
∫ About the AC mains lead with a moulded three pin plug
4
VQT4N13 (ENG)