Table of Contents
Advertisement
3. Pull the surface unit straight away
from the receptacle.
4. Lift out the reflector
bowl. See
"Cleaning
Chart" on page
9 for
cleaning
instructions.
Replacing
2. Line up openings
in the reflector
bowl with the surface unit recep-
tacle and the element
hold down
clip.
3. Hold the surface unit as level as
possible
with the terminal
just
started
into the receptacle.
Push
the surface
unit terminal
into the
receptacle.
4. When terminal
is pushed
into the
receptacle
as far as it will go, push
down the edge
of the surface unit
opposite
the receptacle.
The ele-
ment hold down clip will keep the
surface unit from moving
around.
Advertisement
Table of Contents
