Table of Contents
Advertisement
3. Pull the surface
unit straight away
from the receptacle.
4. Lift out the reflector
bowl. See
"Cleaning
Char-t" on page
9 for
cleaning
instructions.
Replacing
3. Hold the surface
unit as level as
possible
with the terminal
just
started
into the receptacle.
Push
the surface
unit terminal
into the
receptacle.
2. Line up openings
in the reflector
bowl with the surface unit recep-
tacle and the element
hold down
clip.
4. When terminal
is pushed
into the
receptacle
as far as it will go, push
down the edge
of the surface
unit
opposite
the receptacle.
The ele-
ment hold down clip will keep the
surface unit from moving
around.
Advertisement
Table of Contents
