R3S User Manual
To reduce the risk of personal injury, electric shock, or damage to the unit, please remove all
power connections to completely shut down the device. Also, please wear ESD protection
gloves when conducting the steps in this chapter.
Open the Chassis
For installation of the M.2 LTE and mSATA storage, please remove the HDD trey and tilt down
the device and remove screw on the front/back and two sides as below:
JRI1
Remove the Tray
M.2
(LTE2)
JRI2
Lift the chassis and remove the indicated screws that secure the board onto the standoffs
24