Table of Contents
Advertisement
INTRODUCTION
This tool is used for stapling and nailing of cardboard, insulating material, fabrics, foils, leather
and similar materials on surfaces of wood or materials similar to wood
Read, understand and keep this instruction manual (3)
TOOL ELEMENTS
A
Lever for loading magazine
B
Slider
C
Magazine
D
Tacker head
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your
mains operated (corded) power tool or battery operated (cordless) power tool.
1) WORK AREA
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
E
Trigger
F
Impact control selection wheel
G
On/Off switch
Seite 13
Advertisement
Table of Contents
