Gaiam STAY-N-PLAY Setup, Usage Tips, And Care & Safety Manual

STAY-N-PLAY BALL
Setup, Usage Tips, and Care & Safety Guide
Please read before setting up or using your Stay-N-Play Ball.

TOOLS NEEDED

1. Stay-N-Play Ball pump (you may want to use a bicycle pump or compressor for
initial inflation).

SETUP

1. Remove Stay-N-Play Ball from box and check for shipping damage. (Note: it is
normal for balls to have slight creases or fold marks when first inflated.)
2. Allow ball to reach room temperature before inflating.
3. Insert tip of pump into hole in Stay-N-Play Ball. Inflate ball to the desired height and
firmness. DO NOT overinflate.
4. Remove pump from ball and immediately insert plug into hole (so head is flush with
surface of ball). DO NOT overinflate.
5. Your Stay-N-Play Ball is now ready for use.

INFLATION NOTICE

• Inflate ball and plug.
• Ball may not inflate to 100% of
size on initial inflation.
• Wait 24 hrs.
• Deflate 50% and inflate again.
• Due to the ball's material, the ball
will increase to proper size with
second inflation.
RECOMMENDATION
Recommended for children ages 5 - 8
ranging in heights from 42" - 51".