Gaiam PEANUT BALL JR. Setup, Usage Tips, And Care & Safety Manual

PEANUT BALL JR.
Setup, Usage Tips, and Care & Safety Guide
Please read before setting up or using your Peanut Ball Jr.

TOOLS NEEDED

1. Peanut Ball Jr. pump (you may want to use a bicycle pump or compressor for
initial inflation).

SETUP

1. Remove Peanut Ball Jr. from box and check for shipping damage. (Note: it is normal
for balls to have slight creases or fold marks when first inflated.)
2. Allow ball to reach room temperature before inflating.
3. Insert tip of pump into hole in Peanut Ball Jr. Inflate ball to the desired height and
firmness. DO NOT overinflate. OVERINFLATION OF THE BALL MAY CAUSE
BALL EXPLOSION.
4. Remove pump from ball and immediately insert plug into hole (so head is flush with
surface of ball). DO NOT overinflate.
5. Your Peanut Ball Jr. is now ready for use.
CAUTION:
DO NOT OVERINFLATE. OVERINFLATION OF THE BALL MAY CAUSE
BALL EXPLOSION.
INFLATION NOTICE
• Inflate ball and plug.
• Ball may not inflate to 100% of
size on initial inflation.
• Wait 24 hrs.
• Deflate 50% and inflate again.
• Due to the ball's material, the ball
will increase to proper size with
second inflation.
RECOMMENDATION
Recommended for children ages 5 - 8
ranging in heights from 42" - 51".