Care And Maintenance; Dismantling And Repairs - Festo MAS Series Operating Instructions Manual

MAS−...
8

Care and maintenance

If required, clean the MAS−... with water or soap suds (max. 60 °C).
S
9

Dismantling and repairs

If there are signs of wear as listed in the chapter on operation:
Replace the MAS−... completely.
S
The safety requirements concerning the connection between the contractible
membrane and the connecting flange do not at present permit repairs to this
unit.
Before dismantling the MAS−...:
Exhaust the complete system and the product.
S
10 Accessories
Designation
Old adapter
New adapter
Flexocoupling
Rod clevis
Coupling item
*)
Please observe the assignment of accessories and MAS types in accordance with
catalogue specifications. If an MAS−10−...−K with force locking is replaced by an
MAS−10−... without force locking, the existing adapter (with long fastening thread)
will damage the connecting thread of the MAS−... .
Fig. 14
22
*)
Type
MXAC−...
MXAD−...
FK−...
SG..−...
KS..−...
Festo MAS−... 0401b − English