Table of Contents
Advertisement
RAISE AND RELEASE
DRAWER FRONTS:
This unit is equipped with the raise and
release drawer fronts. To open, lift up on
the drawer front while pulling towards
you. To close, shut the drawer firmly until
the latch engages. If the drawer does not
stay closed, the hook may be bent, or it
may rub against the drawer slides. To fix
this problem, lightly bend the hook until
the drawer will engage in the slide.
o P E R A T I o n
TO REMOvE DRAWERS
Empty drawer. Pull drawer out to almost
full extension.
Push up on right hand black release lever,
while pulling down on the left hand black
release lever. While holding the levers in
the positions as instructed above, pull the
drawer outward until it is released from
the drawer slide.
PUSH UP
(RIGHT HAND SIDE)
PUSH UP
(RIGHT HAND SIDE)
PULL DOWN
(LEFT HAND SIDE)
PULL DOWN
(LEFT HAND SIDE)
TO REPLACE DRAWERS
Empty drawer. Extend the drawer slides
from the tool chest. Insert the brackets on
each side of the drawer into the slots in
the cabinet slides, being careful that they
are properly positioned. Once properly
inserted, completely close the drawer to
set the slides in their proper positions.
6
Advertisement
Table of Contents
