Brother SF-4000 Online User's Manual page 6

2. Select the SF Function.
From the printer driver:
a) Open the printer driver dialog box.
b) Click the Advanced tab.
c) Do one of the following:
- Select the Staple or Offset check box
- Select both the Staple and Offset check boxes
d) Click OK.
・ If you do not see the Staple and Offset check boxes, make sure you have installed the correct
printer driver.
・ You can activate the Staple and Offset functions at the same time.
From the machine's LCD:
a) On the machine's LCD, press
b) Press [On] or [Off].
For non-standard printer drivers only. Not required for the users of the standard Brother printer driver.
[Settings] > [Paper Tray] > [Staple] or [Offset].
3