• If the operator ID is to be reset or changed:
Press
There the current operator ID is replaced by the original
operator ID. The procedure "CAT is to be changed" can
be repeated or by pressing the
cancelled.
• Press the
—> The menu "Setting the LNB oscillator frequency" –
Setting the LNB oscillator frequency
Bx 1A
Bx 1A
LNB-Freq.:
LNB-Freq.:
f = 10600 MHz
f = 10600 MHz
• Use the
to be changed and use
frequency.
• Press the
—> The menu "Setting the input symbol rate and the
to return to the CAT input menu "Bx 1A CAT".
button.
"LNB-Freq.:" is activated.
/
/
◀
◀
▶
▶
/
buttons to place the cursor under the number
◀
▶
button:
DVB mode" – "INPUT" is activated.
- 23 -
- 23 -
button it can be
to set the LNB oscillator