Advertisement
Quick Links
Advertisement
Related Manuals for Air’n Outdoor Granita
Summary of Contents for Air’n Outdoor Granita
- Page 1 Granita...
-
Page 2: Warranty
Warranty Your Air'n Outdoor ® watch is warranted by WEADU SA* for a period of twenty four (24) months from the date of purchase under the terms and conditions of this warranty. The international Air'n Outdoor ® warranty covers material and manufacturing defects existing at the time of the purchase of the Air'n Outdoor®... -
Page 3: Button's Functions
1- Button's functions Escape return to Time mode Press and hold: Reset or Valid Time , Alarm, Chrono, Timer, Pedometer pages 5-7 : Backlight 3 sec ) Press and hold: Adjust mode Inclinometer, Temperature page 11 Under Alti.: Altitude max. Under Alti. - Page 4 2-Setup 1- Press and hold , selection ashes, choose your time indication format (24 or 12 hours format). 2- Adjust by pressing 3- Validate on 4- Repeat the same operation for the year, months, days, hours, minutes, seconds. Validate on 5- DST Daylight Saving Time, +1 hour during summer time, press to enable or disable this function.
- Page 5 2-Setup 2 sec 2 sec = EL BACKLIGHT...
- Page 6 3-Alarm/Stopwatch 1- Alarm: press until you enter in alarm mode (ALM). 2- Press to switch on/o the alarm ( appears). 3- Press and hold to adjust the alarm time, hours ash. 4- Press to adjust hours , validate on ,repeat the same operation for the minutes.
- Page 7 3-Alarm/Stopwatch = EL BACKLIGHT 2 sec 2 sec=res 2 sec=val 2 sec (2 sec to unlock)
- Page 8 4-Countdown/Pedometer 1- Countdown: from the time mode, press until you enter in countdown mode (TMR). 2- Press and hold to adjust the countdown (selection ashes). 3- Press to adjust hours , validate on , repeat the same operation for the minutes. 4- Repeat the same operation for seconds.
- Page 9 4-Countdown/pedometer 2 sec 2 sec=res 2 sec=lock (2 sec to unlock) = EL BACKLIGHT 2 sec 2 sec=lock (2 sec to unlock)
- Page 10 5-Altimeter/Barometer/Altitude Change 1- Altimeter: from the time mode, press until you enter in altimeter mode (ALTI). 2- Press to display the maximum registered altitude (press and hold to reset). 3- If needed,press and hold to calibrate the altitude. Increment on , decrement on Press and hold to validate.
- Page 11 5-Altimeter/Barometer/Altitude change 2 sec (2 sec to unlock) ALTI ALTI 2 sec=res 2 sec=cal ALTI ALTI 2 sec=valid. BARO ALTI after 2 sec. BARO ALTI ALTI = EL BACKLIGHT...
- Page 12 6-Inclinometer/Temperature 1- Inclinometer:* from the Time mode, press until you enter in inclinometer mode (INCL). Put your watch parallel at the slope, the display indicates the inclinaison. 2- Temperature: from the Time mode, press until you enter in temperature mode (TEMP). The display indicates the current temperature.
- Page 13 6-Inclinometer/Temperature 2 sec=cal COMP 7-UTC 1- UTC: press until entering in mode UTC (UT+X) 2- press to adjust the local time zone. = EL BACKLIGHT...
-
Page 14: Maintenance
8-Maintenance 1- Exchange the strap: To exchange the strap, pull strongly at 6 o'clock and 12 o'clock to get out the strap from the jaws.Insert the new strap at 6 o'clock and 12 o'clock into the jaws. Control under the watch that all is correctly xed. 2- Cleaning: Clean your watch with water and soap.Never use solvant. - Page 15 8-Maintenance Strap exchange Cleaning Sensors 5-extreme conditions use In case of use of the watch in less than -10°C or more than 50°C temperature, it is recommanded to lock the display in the most useful mode (e.g. Altimeter). in case of immersion, it is not recommanded to press on the pushers.
- Page 16 4Q2017 www.airn.ch WEADU SA Rue du cendrier 15 CP 2067 CH-1211 Genève 1...
Need help?
Do you have a question about the Granita and is the answer not in the manual?
Questions and answers