Page 2
Basic buttons functions Matrix section Features: Time,date Alarm Countdown Chronometer Pedometer (with diary) Altimeter,Depth (with diary) Barometer Inclinometer Temperature Compass DST (daylight saving system) Backlight, reset, escape Standby mode Long press: nothing Backlight Icy blue Mode select: Long life battery Long press: switch to adjust mode Carbon strengthened Switch to Inclinometer, Temperature, Compass...
Page 3
Set up 1- Press = on Press 2 seconds on to switch on the watch Press 2 seconds on selection ashes (NB: the date starts at 2016) Adjust press on Validate press on Repeat the same operation for month,day,hour,minute and enter in DST DST Daylight Saving Time (+1 hour in Summer Time) press on to enable or disable.
Page 4
Alarm/Stopwatch Selection ashes Alarm: press on to switch to alarm mode Press on to eanable / disable the alarm Press on to con rm Press 2 sec on to adjust time alarm; selection ashes Press on to adjust hours, validate on repeat the same operation for the minutes Stopwatch: press on 2 times to switch to stopwatch mode...
Page 5
Countdown/Pedometer Selection ashes 2 sec Countdown: press on 3 times to switch to count down mode Press 2 sec on to enter in adjust mode ( selection ashes ) Press on to adjust, validate on, repeat the same operation for the date, hour and minutes Press on to activate the countdown Press 2 sec on...
Page 6
Altimeter/Barometer/Altitude change Altimeter: press on to switch to the altimeter mode Press on to get the maximum elevation in memory Press 2 sec on to change the matrix display (use switch from the graph to units, graph or function name) Barometer: press on to switch to barometer mode Press 2 sec on...
Page 7
Temperature/Inclinometer/Compass 28 ° Horizon Temperature: press on to switch to temperature mode Inclinometer: press on 2 times to switch to inclinometer (refer to the picture A) Compass: press on 3 times to switch to compass Press on to switch to calibrate compass Press 3 sec on , keep the watch horizontally and make a 360°...
Page 8
Changing strap, maintenance 1- Change the strap: To change the strap, pull strongly to 6 hours and 12 hours to release the jaws . Remove the bracelet, then insert the new bracelet. Make sure to insert the silicone in the jaws . 2-Cleaning: Always clean your airn with soapy water.
Need help?
Do you have a question about the GRANITA and is the answer not in the manual?
Questions and answers