Umbrella Base Operation - HAMPTON BAY FDS50285-ST-2 Use And Care Manual

Umbrella Base Operation

1
Inserting The Umbrella To The Base
Insert the umbrella into the cap (G) and pole (H) as shown in figure (1). Tighten the cap (G) by rotating clockwise to secure
the umbrella to the base (F) as shown in figue (2).
2
Removing The Umbrella From The Base
Fully loosen the cap (G) by rotating counterclockwise as shown in figure (1), and then take the umbrella out from the base
as shown in figure (2).
G
H
F
G
12
H
G