Limbing A Tree - Ryobi OCS1830BL Original Instructions Manual

OPERATION

LIMBING A TREE

WARNING: Do not stand on any unstable
surface while using the product. This
could include, but is not limited, to ladders,
scaffolds, and trees.
NOTE: Leave larger lower limbs to support
the log off the ground. Remove the small
limbs in one cut. Branches under tension
should be cut from the bottom up to avoid
binding the product.
WARNING: Watch out for spring poles—
they are dangerous. Do not attempt to cut
bent branches or stumps that are under
tension unless you are professionally trained
and competent to do so.
20