Table of Contents
Advertisement
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye, ear, and head protection.
Wear non-slip safety footwear when
using the product.
Wear non-slip, heavy duty gloves.
Beware of chainsaw kickback and
avoid contact with bar tip.
Do not expose the product to rain or
damp condition.
Hold and operate the saw properly
with both hands.
Do not operate the saw using only
one hand.
Remove the battery pack before
starting any work on the product.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
The guaranteed sould power level is
96
96 dB.
Bar and chain lubricant
Minimum lubricant level
Lock
Unlock
Rotate to adjust chain tension
+ = Tighten the chain
- = Loosen the chain
Moving direction of the chain.
(Marked under the sprocket cover)
Set the chain brake to the RUN
position.
Set the chain brake to the BRAKE
position.
V
: 10 m/s
No-load chain speed is 10 m/s
0
L max: 300mm
Maximum guide bar length is 300 mm
SYMBOLS IN THIS MANUAL
Parts or accessories sold separately
Note
Warning
Wear eye and face protection.
Wear upper body protection.
Wear leg protection.
Stop the product.
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
9
Hide quick links:
Advertisement
Table of Contents
